Hpypex Electronics UcD180OEM
Hpypex Electronics UcD180OEM
Hpypex Electronics UcD180OEM
180400adapter_small
180W UcD amplifier. Ideal for multi-channel systems, active loudspeakers and public address systems
The UcD180™ (OEM version) amplifier module is a self-contained high-performance class D amplifier
intended for a wide range of audio applications, ranging from Public Address systems to ultrahighfidelity
replay systems for studio and home use.
| Output Power | : 180W/4Ohms |
| Dimensions | : 67mm x 73mm |
| Weight | : 100g. |
180W UcD amplifier. Ideal for multi-channel systems, active loudspeakers and public address systems
Chief distinguishing features are flat frequency
response irrespective of load impedance, nearly frequency-independent distortion behaviour and
very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating
loop taking feedback only at the speaker output.
Power Supply Hypex electronics smps180v2
Power Supply Hypex electronics smps180v2
The SMPS180 is a high efficiency Safety Class 2 switch mode power supply specifically designed for
use with our range of UcD™ amplifier modules. Key features are high efficiency over the entire load
range, universal input voltage range (85 – 264V, 50 – 60Hz), near unity Power Factor, low weight and
very low radiated and conducted EMI. The SMPS180 also features an advanced overcurrent
protection which in case of temporary overload simply reduces the output voltage, only when the
overload condition remains for a longer time the supply will enter hiccup mode until the overload
condition disappears. This feature in combination with the advanced feedback topology and large
secondary bulk storage output caps leads to the capability of delivering high dynamic headroom
power to the connected amplifier. The SMPS180 also includes an auxiliary isolated ±12V supply and
a control circuit directly interfacing with our range of (OEM and standard) UcD™ amplifier modules.
The supply is triggered for normal operation or latched off in case of critical fault via in built-in
actuators. The SMPS180 is optimized from the first phase of design to final implementation to
realize the low EMI signature required of the most demanding audio applications.
Hypex electronics tr180
Hypex electronics tr180
The UcD180™ (OEM version) amplifier module is a self-contained high-performance class D amplifier
intended for a wide range of audio applications, ranging from Public Address systems to ultrahighfidelity
replay systems for studio and home use. Chief distinguishing features are flat frequency
response irrespective of load impedance, nearly frequency-independent distortion behaviour and
very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating
loop taking feedback only at the speaker output.
